TL1100 Preset Therapies

Std (Standard Mode) - The unit provides a beat frequency of 1 Hz for 6 sec. and then supplies a beat frequency of 10 Hz for 6 sec. This therapy is repeated for 10 min. After the initial 10 min. treatment the unit produces a beat frequency that sweeps from 80 Hz to 150 Hz within 6 sec. This second treatment continues for another 10 min. After 20 min., the unit shuts off. ( For pain and swelling after surgery)

36R (30% - 60% Ramp ) - The unit provides a beat frequency that gradually changes (ramps) from 30% below the set frequency to 60% above the set frequency within 6 sec. This treatment continues for 30 min. After 30 min. the unit shuts off.

36A (30% - 60% Abrupt) - The unit provides a beat frequency that abruptly changes from 30% below the set frequency to 60% above the set frequency within 6 sec. This treatment continues for 30 min. After 30 min. the unit shuts off.

Cont (Continuous) - The unit provides a beat frequency of 100 Hz for the full treatment time of 60 min.

Stim (Stimulator) - The unit provides a beat frequency of 48 hz for 6 sec. followed by a ramp down to "0" amplitude that lasts for 6 sec. This phase is followed by a ramp back to the original amplitude where the cycle is repeated. This treatment lasts for 60 min.

Mem (Memory Locations) - The unit allows modifications of one of the five previously described therapies. The customized therapies can be stored into a memory locations and recalled by the patient for use.